Mudroom Bench with Cubbies and Hooks Plans PDF, 48 in Entryway Storage Bench, Plywood Woodworking Plan, DIY Digital Download with Cut List

A 4-foot mudroom bench with three open cubbies and a matching wall hook board with top shelf, built from one and a half sheets of plywood plus two pine boards.

The difference: exact-fit cubbies. The three openings are sized 15 in wide x 13-3/4 in tall x 15-1/4 in deep so standard 13 x 15 in storage bins slide in with about 1/4 in of clearance and no wasted space above them. Most bench plans leave you with whatever width is left over.

What you get

• Finished dimensions in inches and millimetres - bench 48 W x 15-1/2 D x 18 H in (1219 x 394 x 457 mm), hook unit 48 x 5-1/2 x 8 in
• Complete cut list - all 9 parts, lettered A through I, with quantities, exact finished sizes in inches AND millimetres, and material for each
• Four build diagrams - front elevation, side section, exploded assembly view, and a sheet cut layout for the 3/4 in plywood
• 17 numbered assembly steps, each one action, referencing the lettered parts
• Full materials and hardware list with counts
• Tool list split into required and optional
• A common mistakes section written for this specific build
• Finishing and maintenance notes

Skill level: Intermediate. Build time: 8-11 hours over two days. Seat height is 18 in - normal chair height, comfortable for pulling boots on.

INSTANT DIGITAL DOWNLOAD - no physical item is shipped. You receive a printable PDF available immediately after purchase, sized for standard letter paper.

For personal use only. Not for resale or redistribution of the file.

This plan was designed, dimensioned and illustrated with the assistance of AI tools. All measurements were arithmetically verified before publication.