Rolling Garage Storage Cart Plans PDF - 36 x 20 x 34 in, 3 Shelves, Plywood Woodworking Plan with Cut List
$12.99
A rolling plywood storage cart that fits under a 36 in workbench instead of taking up wall space. Finished size 36" W x 20" D x 34" H (37-1/2" including the push handle). Three levels, each closed off at the front by a 1-1/4" retaining lip so cans, bins and offcuts do not walk off while you push it. The top has no lip, so it doubles as a work surface when the cart is parked.
What you get
- Finished dimensions in inches and millimetres
- Full cut list - 11 parts (A-K), every finished size in both units, with per-part notes
- 5 dimensioned drawings: front elevation, side elevation, base plan with the caster lag pattern, plywood cut layout for both sheets, and an exploded assembly-order view
- 14 numbered assembly steps, each one action, referenced to the cut-list part letters
- Materials and hardware list with exact counts (93 screws, 16 lag screws, 4 casters, and so on)
- Common mistakes on this build - 5 specific pitfalls, including why casters must never lag into plywood
- Finishing, maintenance, and a worked load-rating table
Specs
- Skill level: Beginner to Intermediate. No joinery - every joint is a butt joint with screws.
- Build time: 4 to 5 hours, plus finish drying time
- Rated: 400 lb total, 150 lb per level. Full-height centre divider means no shelf spans more than 16-7/8".
- Materials: two sheets of 3/4" 4x8 plywood, one 48x48 handy panel of 1/4" plywood, one 2x4x8, one 1-1/4" hardwood dowel
- Tools: circular saw with a guide (or track saw), drill/driver, 1-1/4" Forstner or spade bit, countersink, socket or wrench, clamps
Instant digital download. No physical item is shipped. You receive a print-ready PDF, formatted for standard letter paper.
For personal use only. Not for resale or redistribution of the file.
AI-use disclosure: this plan was designed, calculated and illustrated with AI assistance, then dimensionally checked and reviewed before publishing.