Elevated Dog Bowl Stand Plans PDF - 3 Sizes, Raised Dog Feeder Woodworking Plan with Cut List, Digital Download
Printable PDF woodworking plans for an elevated dog bowl stand, sized for small, medium and large dogs. Beginner build, roughly 3 to 4 hours of shop time plus an overnight glue-up. Built from three boards you can buy at any home centre: one 1x8, one 2x2 and one 1x3.
Finished sizes (all share the same 24" x 14-1/2" top):
- Small - 6" finished height, suits a dog 12-15" at the shoulder
- Medium - 10" finished height, suits a dog 16-21" at the shoulder
- Large - 14" finished height, suits a dog 22-28" at the shoulder
What is in the plan (11 pages):
- Full cut list for all three sizes, every part in inches and millimetres
- Dog fitting table so you pick the right height before you cut
- Bowl-hole sizing guide - holes drawn at 7-1/2" and adjustable from 6" to 9-1/2" without changing any other part
- Four dimensioned diagrams: top layout, front elevations of all three sizes, side elevation and a lumber cut layout with offcuts marked
- 14 numbered assembly steps with both pocket-hole and through-screw methods
- Tool list, hardware list, finishing and maintenance notes
- Five common mistakes specific to this build
- Tear-out quick-reference shop card
Skill level: Beginner. No joinery beyond a simple edge glue-up, screws and a hole saw or jigsaw.
INSTANT DIGITAL DOWNLOAD - no physical item is shipped. You receive a PDF available immediately after purchase. Printable on standard letter paper.
For personal use only. Not for resale or redistribution of the file.
AI use disclosure: this plan was designed, dimensioned, drawn and written with AI assistance. Every dimension in the text, cut list and drawings comes from a single parametric model and was checked arithmetically for self-consistency before publication. The cover illustration is AI-generated and represents the finished piece; it is not a photograph of a built example.